Name: Sigma 3000Kg Heavy-Duty Cargo Lift Price in Bangladesh
Brand: Sigma
SKU: 118294
Price: 1900000 BDT
Availability: InStock

Sigma 3000Kg Heavy-Duty Cargo Lift

ID: 118294 Status: In Stock

Price in Bangladesh

The lowest price of Sigma 3000kg heavy-duty cargo lift in Bangladesh is Tk 1,900,000 only. Buy at low price in Bdstall. There is currently 1 seller.

Shyamoli

(Dhaka)

Call Seller WhatsApp

৳ 1,900,000

2 months ago

2 years parts

2 years service

New

Full Specification

Item	Lift
Brand	Sigma
Lift Type	Cargo
Load Capacity	3000 kg / 3 Ton
Number of Stop	up to 4-5 floor
Motor Power	18 kW to 30 kW
Power Supply	3-phase, 380V/400V/415V, 50 Hz or 60 Hz

General Specification
- Lift Type: Heavy-duty cargo lift
- Drive System: Traction or hydraulic (traction lifts are typically faster and more energy-efficient)
- Number of Stops: Variable, based on building requirements
- Control System: Microprocessor or PLC-based control system
Cabin (Lift Car) Specification
- Cabin Width: 2000 mm to 3000 mm
- Cabin Depth: 2500 mm to 3500 mm
- Cabin Height: 2000 mm to 2500 mm (adjustable based on requirements)
- Cabin Material
  - Steel-reinforced structure
  - Heavy-duty stainless steel or powder-coated finish for durability
  - Anti-slip flooring (rubberized or checkered steel plate)
- Lighting: LED or fluorescent lighting inside the cabin
- Door Type
  - Manual or automatic sliding doors (preferred for ease of use)
  - Roll-up shutter doors can also be an option for industrial usage
- Door Size: 1500 mm to 2000 mm wide, 2000 mm to 2500 mm high
Shaft and Pit Dimension
- Shaft Width: 3000 mm to 3500 mm
- Shaft Depth: 3500 mm to 4000 mm
- Pit Depth: 1200 mm to 1500 mm (deeper pit for hydraulic lifts)
- Overhead Clearance: 4000 mm to 5000 mm above the highest landing (for motor and mechanical components)
Drive System
- • Traction Type (preferred for higher floors or faster speeds)
  - Gearless or geared traction system
  - AC variable frequency drive (VFD) for smooth acceleration and deceleration
- • Hydraulic Type (suitable for fewer floors or lower speed)
  - Hydraulic ram or piston system
  - Suitable for lower-rise buildings (up to 4-5 floors)
  - Slower speed but better for heavy lifting
- • Motor Power
  - Typically 18 kW to 30 kW depending on the lift speed and load capacity
Control System
- • Type: Programmable Logic Controller (PLC) or microprocessor-based system
- • Operation Modes
  - Simplex or duplex (multiple lifts)
  - Full collective control for efficient operation
- • Display and Indicators: Digital display for floor numbers, weight indicators, overload warning
- • Control Panel
  - Buttons for floor selection, emergency stop, and door open/close
  - Optional remote control or key-locked panels for secure operation in industrial settings
Safety Features
- Overload Protection: Built-in weight sensors to prevent overloading
- Emergency Stop Button: Located inside the lift and on each landing
- Emergency Alarm: Audible alarm system inside the cabin
- Manual Lowering System: For hydraulic lifts, in case of power failure
- Automatic Rescue Device (ARD): For traction lifts, to move the lift to the nearest floor during a power failure
- Door Safety: Infrared door sensors or mechanical safety edges to prevent the doors from closing on objects
- Safety Gear: Instantaneous safety gear for preventing free fall
- Fire-rated Doors: Fire-resistant doors in industrial environments
Electrical and Power Requirement
- Power Supply: 3-phase, 380V/400V/415V, 50 Hz or 60 Hz
- Motor Rating: 18 kW to 30 kW (depending on motor type and speed)
- Voltage Stabilizer: For a 3000 kg lift, a voltage stabilizer rated at 50 kVA to 60 kVA is recommended (to handle starting surge and ensure consistent power supply)
- Backup Power: Optional UPS or diesel generator for uninterrupted operation in case of power failure
Energy Efficiency
- Regenerative Drives: Optional feature to convert excess energy from braking into usable electricity, reducing energy consumption
- LED Lighting: Low-power, long-lasting lighting in the cabin
- Standby Mode: Energy-saving mode when the lift is not in use
Additional Features
- Ventilation: Ventilation fans or air conditioning for temperature control in the cabin
- Intercom System: Communication system between the cabin and building control room or security office
- Load Weighing Device: Automatically stops the lift if the load exceeds its rated capacity
- Signalization: External and internal LED displays for floor position and operational status
Compliance and Certification
- Standards
  - EN 81-20/50 (Safety and design of elevators)
  - ISO 8383 (Lifts for goods)
  - Local building codes and standards
- Fire Resistance: Fire-resistant doors and materials, compliant with
- local fire safety codes
- Seismic Protection: Optional seismic protection system for buildings in earthquake-prone areas
Dimension and Weight
- Overall Shaft Size: Approx. 3500 mm (width) x 4000 mm (depth)
- Lift Weight: The total weight of the lift can vary, but it’s typically between 3000 kg and 4000 kg depending on the materials used and whether the lift has a soundproof or weatherproof canopy.
Noise Level
- • Noise Level: 70-80 dB (depending on the design and usage)

Description

This Sigma is a heavy-duty cargo lift designed to transport large loads. This lift is generally suitable for use in warehouse, factory or industrial settings. It has a maximum load capacity of 3000 kg / 3 ton. Its speed is 0.25 m/s to 0.5 m/s, but varies depending on the model. This lift has built-in weight sensor which is able to prevent overloading and will automatically sound the siren in case of overloading.